5 signs that your industrial sump pump needs to be replaced

When you plan an industrial property, you must take into account proper drainage and sewage disposal. This helps remove water flow from the ground surface, eliminating the danger of foundation damage. If you have a sump pump, you don’t have to worry that stormwater or sewage will penetrate through the existing cracks and get to the establishment’s foundation. 

A quality sump pump lasts for about 10 years. After this point, the pump no longer functions properly. You don’t need to automatically purchase a new unit because has reached a certain age. However, it’s necessary to monitor the sump pump function and install a replacement at the first sign of decreased performance. 

  1. The sump pump is running non-stop

The industrial sump pump runs until all the water that has accumulated in the water-collecting basin is eliminated – in other words, until the water is eliminated from the basement of the building. If it runs continuously, despite the prevailing weather conditions, that is a sign that something is wrong. If the mechanical device runs longer that it’s supposed to, chances are that it’s stuck on the “On” position. You may be dealing with a simple switch issue. 

On the other hand, you may have a more serious issue on your hands. If the sump pump runs all the time, it may no longer be able to handle the amount of water it’s supposed to. Under flood conditions, it could even fail. An industrial sump pump that doesn’t stop running consumes a great deal of energy, necessitates constant repairs, not to mention that it has a shorter lifespan. If you’ve replaced the sump pump switch and still experience issues, reach out to a professional. They will help you upgrade to a more advanced model. 

  1. The sump pump is regularly cycling on and off 

You’ve noticed that the sump pump goes through a cycle of turning on and off. It could be simple float maladjustment, which is largely due to damage from debris or improper maintenance. Disassembling and reassembling the float switch on the sump pump could do the trick. If this doesn’t work, check the motor. Water may be entering the pit faster than the pump can eliminate it. The result is that the system runs on and on and eventually burns out. 

If the sump pump motor is dead, the system must be replaced altogether. Repairing an old age sump pump is just as costly as a replacement. You should invest in a new sump pump. Look for a company offering a professional industrial pumps service. The expert technicians can provide advice, pump replacement, and back-up accessories. They help you by applying knowledge to the replacement process. You can reduce costs and prevent possible flooding situations. 

  1. The sump pump isn’t properly installed

The sump pump is the most important component of the plumbing system. It mitigates flooding by controlling the groundwater and preventing it from entering the establishment. Nevertheless, if the pump isn’t properly installed, it will fail to do a good job. As a rule, sump pumps shouldn’t be installed in dirt or gravel. The vast majority of buildings built in the last 30 years have foundations upon a certain amount of dirt or gravel. The problem is that the sump pump will get clogged with dirt and debris. 

Units come with clear instructions, yet, unfortunately, not everyone follows them. The best thing to do is to have a new sump pump installed because. If you continue to use the old system, there’s a risk that the water goes right back into the basement. The sump pump can’t do anything to prevent water from entering the building. An incorrectly installed sump pump can cause an industrial setting to be flooded by groundwater. It works harder than necessary, but it doesn’t maintain the crawl space dry. And it will eventually break down. 

  1. The sump pump is making weird noises

It’s not uncommon for a sump pump to make a sound that resembles a low humming. The device makes this sound as the mechanical parts draw in the water. The point is that the humming sound of the industrial sump pump is no reason for concern. You should be worried only if you hear noises that are a lot louder. For instance, a rattling or grinding sound could indicate that the impeller has malfunctioned. The impeller can jam and start making a strange noise. If there is a problem with the impeller, all you have to do is to remove the debris causing the jam. 

If the industrial sump pump is making an unusual noise, there may be something wrong with the motor. You could install rubber stoppers to lessen the impact of the vibration noises. Of course, it would be better if you replaced the mechanical device altogether. A submersible sewage pump, for example, is hermetically sealed, so it can be introduced in the fluid to be pumped. The water is flushed out through piping that runs outside the building. If it ran perfectly before it broke down, it’s recommended to replace the sump pump with a similar model.

  1. The sump pump is too old 

Although the average life expectancy is between 7 to 10 years, you might be able to get more out of the industrial sump pump depending on how hard it has to work. Some can last up to 30 years. Maybe so, yet you must keep a close eye on the performance of the sump pump. If you happen to notice signs of weakness, consider a replacement. It’s advisable to replace the sump pump before there’s an issue. You can make repairs as needed, but there’s no guarantee that the mechanical device will last a long time. 

When the sump pump malfunctions, it’s a clear sign that it’s at the end of its life. If you’re aiming for a more powerful, quiet operation, opt for a submersible pump. Due to the advanced capabilities, it can deal with difficult situations where water is more commonly present. Reach out to professional service technicians. They can identify the problem and recommend a new pump that ensures high performance and can withstand the test of time.